This is a modded Turnigy 9x with custom ER9x firmware correcting many flaws of the previous 9X, plus inbuilt 2.4Ghz 16-20 after market Antenna. This is a quality, reliable 2.4Ghz system suitable for beginners and pro pilots alike. Get that locked-in feeling that only 2.4Ghz glitch free technology can provide.
Ultra fast reaction times and interference free control of your model is only achievable with this 2.4Ghz technology.
Without a doubt, the best value 9Ch system available!
Please tell us which mode you want you controller to be.
mode 1 Throttle on right stick
mode 2 Throttle on Left stick
Number of Channnel:
8ch ppm/9ch pcm
Display:
128*64LCD
Support Type:
Heli/Acro/Glid
Support user:
8
Stick model:
4
Encoder type:
ppm/pcm
Subtrim:
Yes
Simulator Interface:
Yes
Buzzer:
Yes
Low Voltage Show:
Yes
Required:
Battery
Included:
Turnigy 9x 9Ch Transmitter
Turnigy RF9X-V2 module
Turnigy 9X8C-V2 8-channel receiver
Upgrades:
Blue LCD backlight mod.
Custom Er9x firmware with Pc connector & usb isp programmer for reflashing firmware.
Transistor trainer module fix.
Anntenna mounted on module with 2.4 ghz 16-20 dpi gain Anntenna. sma connector
(optional mod ) Gryo 1000 headtracking mod - power socket added to old anntena port for powering headtracker.
(optional mod ) 12 volt output for misc useage.
Important.
The TURNIGY 9X has been reflashed with the new ER9x custom firmware, fixing previous menu and mixing issues.
I will put original Turnigy 9x firmware on disk if you wish to reflash back to stock firmware.
NOTE: "SWITCH ERROR" means you have one of the switches in the wrong position when you turn the radio on. It is not a fault.
Above is the stock Turnigy controller without mods. Pick-up cost $100.00
Above is the new 2.4 mhz antenna mounted with sma connector
Blue LCD screen with ER 9x Custom Firmware
